Agitation |
Drive |
DC motor, AC Gear motor, Top drive(mechanical drive) |
Range |
50~1000rpm ±1rpm |
Impellers |
Turbine impeller(SUS316L) Foam breaker (SUS316L) |
Sensor |
Magnetic Hall sensor |
Control |
Microprocessor based PID |
Materials&
Finish |
Vessel |
Using 316L stainless steel it is polished mechanically and/or electrically |
Piping |
316L stainless steel prevent contamination and is polished by electrically |
O-rings/Gaskets |
Viton or silicon material is used for the O-ring and the EPDM is used for gasket |
Heating Plate |
The head lift system is powered by air cylinder and guided by two sets of linear motion fuide. The lifting load capacity can be adjusted and designed for the size of the head plate |
Temperature |
Range(℃) |
From 3oC above the cooling water temperature to 80oC (accuracy ±0.1 ℃) |
Sensor |
RTD(Pt-100) |
Control |
The temperature is automatically controlled by the built-in heater cartridge |
Aeration |
Sparger |
Ring sparger (SUS 316L) |
Intel Filter |
The cartridge type sterilizable pleated type 0.2um absolute filter is applied |
Outer Filter |
The same as intel filter specification(option item) |
Control Range |
Different vessel size and/or ordered specifications |
Pressure Control |
The pressure is controlled manually and/or automatically |
Control Unit |
Panel |
8.5"Graphic Color LCD, Membrane keypad |
Communications |
Memory stick, printer, computer with the RS-232C communications protocol |
Controller Board |
Microprocessor based integrated controller board is adopted to measure, control and display the fermentation system |
Power Supply |
220V 50/60Hz, Single phase, 380V 50/60Hz three phase |
Data Storage |
pH, DO, Pressure, Temperature and Agitation speed |